CONTENTS - Part 1

Plenary Lectures

A Historical Survey of Texture Development between ICOTOM-1 and ICOTOM-10
J. Grewen

 3

Statistical Crystallography of the Polycrystal
H.J. Bunge

13

Orientation Imaging Microscopy: New Possibilities for Microstructural Investigation Using Automated BKD Analysis
B.L. Adams  D.J. Dingley  K. Kunze  S.I. Wright

31

Textures in Ceramic Materials  
K.J. Bowman

43

1. EXPERIMENTAL METHODS OF POLE FIGURE AND INDIVIDUAL GRAIN ORIENTATION ANALYSIS

Invited Lecture:
Texture Analysis by Neutron Diffraction
H.-G. Brokmeier

59

Panel Discussion:
Advanced Experimental Techniques in X-Ray Texture Analysis
H.J. Bunge R. Großterlinden A. Haase R. Ortega J.A. Szpunar P. Van Houtte

71

Quantitative Texture Analysis of Thin Polycrystalline Layers  
G. Bermig J. Tobisch K. Helming

97

An Experimental Apparatus for Quantitative On-Line Texture Analysis
P. Blandford J.A. Szpunar

103

Investigation of Inhomogeneous Textures of Coatings and Near-Surface-Layers
J.T. Bonarski L. Wcislak H.J. Bunge

111

A New Method for Texture Measurement Based on an X-Ray Imaging Plate System
H.-G. Brokmeier M. Ermrich

119

X-Ray Method for Continuous Tracking of Grain Boundary Motion: Investigation of Grain Boundary Migration in Al-Bicrystals
U. Czubayko D.A. Molodov B.-C. Petersen G. Gottstein L.S. Shvindlerman

125

A High-Pressure Device for In-Situ Measurements in a Neutron Beam
J. Heinitz N.N. Isakov A.N. Nikitin W.A. Sukhoparov K. Ullemeyer K. Walther

131

Electronmicrodiffraction (EBSP) in the Scanning Electron Microscope (SEM) - Further Hardware Development to Improve Pattern Quality
J. Hjelen A.H. Qvale 0. Gomo

137

A High Resolution Electron Diffraction Method for On-Line Texture Analysis
R. Høier J. Bentdal 0. Daaland E. Nes

143

Automatic Recognition of Deformed and Recrystallized Regions in Partly Recrystallized Samples Using Electron Back Scattering Patterns
N. C. Krieger Lassen D. Juul Jensen K. Conradsen

149

Optimization of the Texture Determination of Thin Films from X-Ray Diffraction Measurements
B. Moreau F. Wagner H. Göbel

159

Determination of Texture in CuZnAl Shape Memory Alloys in the High Temperature Austenitic Phase
N.J. Park H.J. Bunge

167

Orientation Connectivity in Polycrystals
V. Randle

175

High Temperature Texture Goniometer for the Measurement of Transformation Textures
F.R. Reher W. Hdnel U. Czubayko G. Gottstein

181

A CCD Camera System for the Acquisition of Backscatter Kikuchi Patterns on an SEM
R.A. Schwarzer

187

An Inexpensive CCD Camera System for the Recording and On-Line Interpretation of TEM Kikuchi Patterns
R.A. Schwarzer S. Zaefferer

189

On-line Interpretation of SAD Channeling Patterns
R.A. Schwarzer S. Zaefferer

195

Preparation of High-Resistance or Sensitive Samples for Grain Orientation Measurement with Electron Microscopes
R.A. Schwarzer

201

Equipment for Texture Measurement in Thin Films
J.A. Szpunar P. Blandford

297

Application of the Method for Non-Destructive Evaluation of Texture Heterogeneity
J. Tarasiuk K. Wierzbanowski A. Baczmanski

213

Influence of Texture on Backscattered Ultrasonic Noise
R.B. Thompson K.Y. Han I. Yalda-Mooshabad J.H. Rose F.J. Margetan

221

Characterisation of Multilayers Crystallographic Texture
A. Tizliouine J. Bessières J.J. Heizmann J.F. Bobo

227

Determination of the Texture of a TiNi Shape Memory Alloy by Treatment of a Set of Overlapping Rays
A. Vadon J.J. Heizmann M. Chaoui

235

On-Line Determination of Deformation Systems for Cubic and Hexagonal Materials with the TEM
S. Zaefferer R.A. Schwarzer

241

On-line Interpretation of Spot and Kikuchi Patterns
S. Zaefferer R.A. Schwarzer

247

Determination of Magnetic Textures in Ferromagnetics by Means of Neutron Diffraction
U. Zink H.-G. Brokmeier H.J. Bunge

251

2. CALCULATION AND REPRESENTATION OF ODF, MODF AND OTHER TEXTURAL QUANTITIES

Invited Lectures:

Statistics, Evaluation and Representation of Single Grain Orientation Measurements
O . Engler G. Gottstein J. Pospiech

259

Experimental Errors in Quantitative Texture Analysis from Diffraction Pole Figures
A. Mücklich P. Klimanek

275

Coordinate Free Tensorial Representation of N-Point Correlation Functions for Microstructure by Harmonic Polynomials
B.L. Adams P.I. Etingof D. Sam

287

Ultrasonic Characterization of the Texture of Aluminum Alloys
A. Anderson R.B. Thompson R. Bolingbroke

295

Some Comments about Texture Analysis: Comparison between Harmonic and Vector Methods
B. Bacroix Th. Chauveau P. Gargano A.A. Pochettino

301

Texture of High Temperature Deformed g -a ₂ Titanium Aluminides
G. Bermig J. Tobisch C. Scheffzük C. Oertel

309

Practical Considerations in the Calculation of Orientation Distribution Functions from Electron Back-Scattered Diffraction Patterns
A .W. Bowen

315

Approximation of Orientation Distribution of Grains in Polycrystalline Samples by Means of Gaussians
T.I. Bucharova T.M. Ivanovo D.I. Nikolayev T.I. Savyolova

323

Automatic Quantitative Analysis of Texture Components from CODF Data
M.J. Cai W.B. Lee

327

ODF Analysis and Physical Properties on Personal Computer Basis
E. Dahlem-Klein H. Klein N.J. Park H.J. Bunge

333

Series Expansion and Positivity
M. Dahms

341

Variation Width, Modelling Assumptions, and Interpretation of ODFs from Diffraction PDFs
J.J. Fundenberger  H. Schaeben

349

Texture Analysis from Diffraction Pole Figures of  Structurally Inhomogeneous Polycrystals
I. Girlich P. Klimanek

357

Some Applications of the Texture Component Model
K. Helming

363

Orientation Representation on the 4-D Unit Sphere, the Analogon of the 3-D Pole Sphere
G. Ibe

369

Estimate of the Grain Number for True ODF Determination by Individual Orientation Detecting Method
Y.S. Liu R. Penelle F. Wang J.Z. Xu Z.D. Liang

375

Absorption Correction for Non-Standard Geometry for Pole Figure Measurements
D.L. Nikolayev K. Walther

381

Approximation of the ODF by Gaussians for Sharp Textures
D.L. Nikolayev T.L. Savyolova

387

Numerical Economization of the Series Method
D.L. Nikolayev

393

The ODF Calculation from Pole Figures for Different Types of Crystal and Sample Symmetries
K. Pawlik

401

Statistical Analysis of Single Grain Orientation Data Generated from Model Textures
J. Pospiech J. Jura G. Gottstein

407

Analysis of the ADC Method for Direct ODF Calculation by Use of Gauss Models and Standard Functions
D. Raabe K. Lücke

413

Inverse Formulas for Orientation Distribution Function
T.I. Savyolova

419

Analogy and Duality of Quantitative Texture Analysis by Harmonic or Indicator Functions
H. Schaeben

423

Exploratory Orientation Data Analysis: Kernel Density Estimation and Clustering
H. Schaeben

431

Methods for Determining Small Differences between Measured Textures
R. Schouwenaars P. Van Houtte

439

Linear Regression for Texture Comparison
J. Tarasiuk K. Wierzbanowski

447

Smoothing Pole Figures Using Tensor Products of Trigonometric and Polynomial Splines
C. Traas H. Siemes H. Schaeben

453

Direct Correspondence between the Volumic Fractions Found by Texture Analysis   with the Vector Method and with the Harmonic Method and Inverse Correspondence
A. Vadon J.J. Heizmann T. Baudin R. Penelle

459

Quantitative Texture Analysis with the Vector Method, Using Pole Figures of Rays and a Set of Overlapping Rays
A. Vadon J.J. Heizmann

465

Texture Analysis from Diffraction Spectra
H.-R. Wenk S. Matthies L. Lutterotti

473

Display of the ODF by an Image Analyzer
L.F. Wu Y. Wang W.P. Liu H.J. Bunge

481

PC Program for the Calculation of ODF from SAD Pole Figures or from Individual Grain Orientations
W. Xia R.A. Schwarzer

487

A Computer Program for Determining Volume Fractions of Texture Components in Cubic Materials
L. Zuo J. Muller C. Esling

493

3. EXPERIMENTAL STUDIES OF TEXTURE FORMATION

Development of Microtextures in Cold-Rolled Iron-Oligocrystals
J. Boeslau D. Raabe

501

Texture Analysis in the Monoclinic Martensitic Phase of a CuZnAl Shape Memory Alloy
M. Dahms N.J. Park H.J. Bunge

507

Texture and Phase Development in Al-40 at% Ni Composites
H. Gertel-Kloos H.-G. Brokmeier

515

Oxidation of Titanium, Zirconium and their Alloys, Texture of their Oxide Scales
/. Halley-Demoulin C. Valot D. Ciosmak M-Lallemant J.J. Heizmann C. Laruelle

521

Texture Analysis of an Amphibolite using the Component Method  
K. Helming R. Kruse S. Siegesmund

529

Changes in Texture by Irradiation with Ar⁺⁺ of Iridium and Platinum Layers on Oriented Sapphire Substrates
V. Jung W. Schneider

535

Cube Texture in Aluminum Single Crystal of a (118)[711] Orientation
T. Kamijo K. Obata M. Ishizuki H. Fukutomi

541

The Texture Competition in Solidification Process
D.Y.Li J.A.Szpunar

547

Texture of Al-7%Si Ingots
D.Y. Li C. Rocaniere S. Da s J.A. Szpunar

555

Texture Transformation due to Martensitic Phase Transformation in CuZnAl Shape Memory Alloys
N.J. Park H.J. Bunge

563

Effect of Phosphorous on the Development of Textures in Ti-Stabilized Steel Sheets
Y.B. Park S.K. Chang D. Raabe K.Lücke

571

Describing the Rolling Texture in Very Low Stacking Fault Energy Alloys
W. Truszkowski J. Pospiech J. Jura J. Gryziecki K. Pawlik

577

3.1 DEFORMATION TEXTURES

Invited Lectures:

Deformation Texture Formation from Single Crystals
J.H. Driver

585

Rolling and Anealing Textures of BCC Metals
D. Raabe K. Lücke

597

Study of the Texture of Steelcord during the Wet Drawing Process - Influence of the Patenting and the Friction on the Dies
A. Abdelaoui T. Montesin J.J. Heizmann J.B. Pelletier

611

The Effects of the Cold Rolling Process on the Texture of Zircaloy-4 Sheets
J.L. Béchade B. Bacroix R. Guillen

617

Texture and Microstructure of Channel-Die Deformed Aluminum Bicrystals with S Orientations
M. Blicharski R. Becker H. Hu

627

Pb Texture of Pb-Al Composites Determined by the Iterative Series Expansion Method and the Component Method
H.-G. Brokmeier K. Helming T. Eschner

633

Plane Strain Compression of Titanium Crystals
N. Cheneau-Späth J.H. Driver

639

Development of Orientation and Damage during the Plastic Deformation of Semicrystalline Polyoxymethylene
A. Dahoun C. G'sell M.J. Philippe G.R. Canova A. Molinari

645

Correlation between Texture and Dislocation Structure in Deformed Metals
V.N. Dnieprenko

653

On the Inhomogeneous Rolling Texture Transition
J. Duggan C.S. Lee R.E. Smallman

659

The Development of Deformation Textures as a Function of the Phase Fractions in Two-Phase Titanium-Based Alloys
D. Dunst R. Dendievel H. Mecking

665

Influence of the Rolling Temperature on the Texture Gradient in an Al-Mg-Si Alloy
O . Engler J. Hirsch K. Karhausen G. Gottstein

673

Rolling Texture Development in Cu-Mn-Alloys
0. Engler C. Pithan K. Lücke

679

Texture Development in Extruded Al-Cu Composites
H. Gertel-Kloos H.-G. Brokmeier H.J. Bunge

685

Textural and Microstructural Evolution during Cold-Rolling of Pure Nickel
N. Hansen D. Juul Jensen D.A. Hughes

693

Circular Texture in Thin Wires
J.J. Heizmann T. Montesin A. Vadon

701

Textures of Rolled and Wire Drawn Cu-20%Nb
F. Heringhaus D. Raabe U. Hangen G. Gottstein

709

Fiber Texture Formation and Mechanical Properties in Drawn Fine Copper Wires
N. Inakazu Y. Kaneno H. Inoue

715

Isothermal Forging Textures in g -TiAl Base Alloys
H. Inoue Y. Yoshida N. Inakazu

721

Crystallographic Texture Changes of Oriented Ethylene-Vinylalcohol Copolymer Films on Rolling
T. Ishida M. Oka Y. Kimura K. Sekine

727

Examples of Neutron Diffraction Texture Analysis on One and the Same Chalcopyrite Sample before and after Experimental Deformation
E.M. Jansen H.-G. Brokmeier H. Siemes

733

Microstructural Analysis of an Experimentally Deformed Chalcopyrite Grain by Orientation Imaging Microscopy
E.M. Jansen K. Kunze

739

Texture Development in Al 3003 during Hot Plane Strain Compression
D. Juul Jensen H. Shi R.K. Bolingbroke

745

Ridging Phenomena in Textured Ferritic Stainless Steel Sheets
H.M. Kim J.A. Szpunar

753

Effect of Copper Alloying on the Development of Cold Rolling Textures in Extra Low Carbon Steels
J.H. Kim H.-C. Lee Y.B. Park K. Lücke

761

Texture Inhomogeneities in Rolled Profiles
H. Klein H.J. Bunge H. Schneider

767

Texture and Yield Locus Evolution in 70/30 Brass under Different Deformation Paths
R.A. Lebensohn C. Vial Edwards A.A. Pochettino C.N. Tomé

783

Quantitative Texture Analysis of Naturally Deformed Polyphase Dolomite Marbles and its Kinematic Significance
B. Leiss K. Helming S. Siegesmund K. Weber

789

Examination of Texture Discontinuity at Sheet Surface due to Cold Rolling
J. Li S. Saimoto H. Sang

795

Strain and Temperature Dependence of Deformation Banding
E. Lim G.W. Greene B.J. Duggan

801

Hot Rolling Textures of Aluminium
Cl. Maurice J.H. Driver

807

Textures in Two Phase Intermetallic TiAl Alloys after Compression and Extrusion
H. Mecking J. Seeger Ch. Hartig G. Frommeyer

813

Preferred Orientation of a Naturally and Experimentally Deformed Pyrrhotite Ore by X-Ray and Neutron Diffraction Texture Analysis
E. Niederschlag H.-G. Brokmeier H. Siemes

821

Texture Development of Cold Drawn Wires in (a + b) CuZnAl Shape Memory Alloys
N.J. Park C.Q. Wang H.J. Bunge

827

Temperature Effects on Rolling Texture Formation in Zirconium Alloys
A.A. Pochettino P. Sanchez R. Lebensohn C.N. Tomé

835

Textures of Cold Rolled and Annealed Tantalum
D. Raabe B. Mulders G. Gottstein K. Lücke

841

Texture Evolution during the Drawing of an Interstitial-Free Low Carbon Steel
C. Schuman M.J. Philippe C. Esling M. Jallon M. Hergesheimer A. Lefort

847

Texture and Microstructure Development in a Cold-Rolled Duplex Stainless Steel Annealed at 800 °C
C.H. Shek G.J. Shen J.K.L. Lai B.J. Duggan

853

About Fair Defining the Texture of Sheet Zinc
M. Staszewski

859

Influence of Grain Boundary Orientation on Deformation and Texture Development in Rolled {112}<111> Cu-Bicrystals
P. Wagner N. Akdut K. Lücke G. Gottstein

865

Formation of Biaxial-Stretching Textures in FCC Sheet Metals
Y. Zhou K.W. Neale

873

Influence of Initial Texture on the Development of Deep Drawing Textures in FCC Metals
Y. Zhou J. Savoie J.J. Jonas

879

3.2 RECRYSTALLIZATION TEXTURES

Invited Lectures:

Formation of the Recrystallization Texture in Deformed Single Crystals
P. Haasen P.-J. Wilbrandt

887

Texture Evolution by Recrystallization and Grain Growth in Cold Rolled and Annealed (100)[001] Single Crystal of Fe-3%Si
J. Harase Y. Ushigami N. Takahashi

899

Texture Development during Secondary Recrystallization
V.Yu. Novikov

905

Rolling and Annealing Texture in Twin Roll Cast Commercial Purity Aluminium
S. Benum O. Engler E. Nes

913

Deformation and Recrystallisation Textures in Al-SiC Metal-Matrix Composites
A.W. Bowen M.G. Ardakani F.J. Humphreys

919

Preferred Grain Boundary Orientations Formed during Secondary Recrystallization of a Cu-0.5 at%-Mn Alloy
B. Dorner P.-J. Wilbrandt P. Haasen

927

Behavior of Statistical Texture Parameters Applied to Single Grain Orientation Measurements in Recrystallized Al-Mn
O . Engler P. Yang G. Gottstein J. Jura J. Pospiech

933

Formation of Recrystallization Textures and Plastic Anisotropy in Al-Mg-Si Alloys
0. Engler A. Chavooshi J. Hirsch G. Gottstein

939

Investigation into the Nucleation Process of Recrystallization in Cold Rolled Boron Doped Ni₃Al
C. Escher G. Gottstein

945

The Use of   S Operators in Investigating Secondary Recrystallization of 3% Silicon Steel
P. Gangli J.A. Szpunar

953

Control of the BCC Metals Texture by Pre-Recrystallization Annealing during Deformation
I .V. Gervasyeva V.V. Gubernatorov

959

Analysis of Misorientation Characteristics in Annealed and Deformed Copper
F. Heidelbach J. Pospiech H.-R. Wenk

965

Growth Selection Experiments on Tensile Deformed <100>-Oriented Alummium (99.998%) Single Crystals
M. Heinrich P.-J. Wilbrandt P. Haasen

971

The Effect of Intermetallic Particles and Fibers on Recrystallization Textures of Cold Rolled Aluminum Alloys
Y. Kaneno H. Inoue N. Inakazu

977

Effect of Substitutional Alloying Elements on the Development of Recrystallization Textures in Extra Low Carbon Steel
J.H. Kim H.-C. Lee Y.B. Park K. Lücke

983

Texture Development during Secondary Recrystallization of Grain Oriented Silicon Steel
K.T. Lee J.A. Szpunar

989

Texture Evolution during Recrystallisation of Ultra-Low Carbon Steel
E. Lindh B. Hutchinson P. Bate

997

Texture Development of Amorphous FeBSi Alloy during Crystallization
J. Lu J.A. Szpunar

1003

Recrystallization Texture in Fe-28Al-5Cr Alloy Sheet
W. Mao Z. Sun

1009

Pancake Grain Structure and Recrystallization Texture Formation in Ultra-Low Carbon Al-Killed Sheet Steels
N. Mizui

1015

Cube Texture Generation Dependence on Deformation Textures in Cold Rolled OFE Copper
C.T. Necker R.D. Doherty A.D. Rollett

1021

Recrystallization Texture in Fe 3% Si Alloys Obtained by Direct Casting: Characterization by EBSD and X-Ray Diffraction
P. Paillard T. Baudin R. Penelle

1027

Effects of Precipitations on the Annealing Textures of Ferritic Stainless Steels
D. Raabe G. Brückner K. Lücke

1033

Texture Development of Strip Cast Ferritic Stainless Steel
D. Raabe M. Hölscher M. Dubke F. Reher K. Lücke

1039

Deformation and Recrystallization Textures of Cu-Si Alloys
W. Ratuszek A. Bunsch K. Chrusciel

1045

Influence of a Region Hot Roiling on the Rolling and Recrystallization Texture of Cold Rolled Ti-Bearing Extra Low Carbon Steel Sheets
T. Senuma

1051

Grain Boundary Misorientation Changes during Grain Growth in Pure Aluminium
L.S. Shvindlerman V.G. Sursaeva V.P. Yashnikov R.G. Faulkner

1057

Grain Structure Evolution during Grain Growth in 2-D-Aluminum Foils
L.S. Shvindlerman V.G. Sursaeva V.Y. Novikov R.G. Faulkner

1063

In situ Observations of the Initial Stage of Recrystallization of Highly Rolled Phosphorous Copper
K. Sztwiertnia F. Haessner

1069

Recrystallization Texture of Cross-Rolled Aluminum Alloy
S. To W.B. Lee B. Ralph

1075

Dynamic Observation of the Growth of Secondary Recrystallized Grains of Fe-3% Si Alloy Utilizing Synchrotron X-Ray Topography
Y. Ushigami K. Kawasaki T. Nakayama Y. Suga J. Harase N. Takahashi

1081

On the Formation of Cube Texture in Aluminium
H.E. Vatne O. Daaland E. Nes

1087

The Effect of Hot-Rolling Parameters on Texture Development and Microstructure in Aluminium AA5182
R.F. Visser I.M. Wolff B.D. Harty

1095

Texture and Grain Boundary Character Distribution (GBCD) in B-Free Ductile Polycrystalline Ni₃Al
T. Watanabe T. Hirano T. Ochiai H. Oikawa

1103

Evolution of the Microtexture during Recrystallization of High Purity Al-Mn
P. Yang O. Engler G. Gottstein

1109

CONTENTS - Part 2

3.3 LOCAL TEXTURES (SHEAR BANDS, EBSP, MISORIENTATION)

Invited Lecture:

Substructure Analysis in Textured Metallic Materials
P. Klimanek

1119

Individual Grain Orientation Relations after High-Speed Hot Rolling of Steel Rods
M. Barthel D. Gerth R.A. Schwarzer P. Klimanek U. Messerschmidt

1131

Local Orientation Investigation on the Ridging Phenomenon in Fe 17% Cr Steel
K. Bethke M. Hölscher K. Lücke

1137

The Influence of Initial Microstructure on the Recrystallization Textures of Aluminium Alloys after Hot Deformation by Laboratory Simulation
R.K. Bolingbroke G.J. Marshall R.A. Ricks

1145

Influence of the Initial Texture on the Microstructure- and Microtexture Development during High Temperature Low Cycle Fatigue
S. Brodesser G. Brückner G. Gottstein

1153

EBSP and SIMS Studies of Oxygen Tracer Diffusion in the High Temperature Superconductor La_2-xSr_xCuO₄
J. Claus G. Borchardt S. Weber S. Scherrer

1161

Deformation Banding and Its Influence on High SFE FCC Rolling Texture Development
B.J. Duggan C.S. Lee R.E. Smallman

1167

Evidence for the Existence of a Special Class of Crystallographic Misorientations
D.P. Field

1175

The Dependence of Dislocation Density and Cell Size on Crystallographic Orientation in Aluminum
D.P. Field H. Weiland

1181

Microtexture Development during High Temperature Deformation of Nimonic 80A Single Crystals
J. Fischer-Bühner D. Ponge G. Gottstein

1189

The Influence of the Extrusion Speed on Texture in the Surface Layer of Alunimium Profiles Investigated by the EBSP Technique
T. Furu O. Sodahl E. Nes L. Hanssen O. Lohne

1197

Stress-Induced Grain Growth in Thin Al-l%Si Layers on Si/SiO₂ Substrates
D. Gerth S. Zaefferer R.A. Schwarzer

1205

Grain Subdivision during Deformation of Polycrystalline Aluminium
N. Hansen D. Juul Jensen

1211

Texture Estimate from Minimum Ranges of SAD Pole Figures
K. Helming R.A. Schwarzer

1219

Evaluation of the High Temperature b Texture of a Sample of TA6V from Individual Orientation Measurements of Plates of the a Phase at Room Temperature
M. Humbert H. Moustahfid F. Wagner M.J. Philippe

1225

Influence of Shear Banding on the Texture in Rolled and Channel-Die Compressed Polycrystalline Copper
Z Jasienski J. Pospiech A. Piatkowski J. Kusnierz A. Litwora K. Pawlik H. Paul

1231

Local Orientation Changes during Shear Banding of Copper Single Crystals Compressed in Channel-Die
Z Jasienski T. Baudin R. Penelle A. Piatkowski

1237

Local Microstructural Investigations in Recrystallized Quartzite Using Orientation Imaging Microscopy
K. Kunze B.L. Adams F. Heidelbach H.-R. Wenk

1243

Effect of Texture on Strain Localization in Deformation Processing
W.B. Lee

1251

A Local Texture Analysis of a Hot Deformed Al-Li-Zr-Alloy
J. Mizera J.H. Driver

1257

About the Texture Influence on the Frequency ot CSL Boundaries in Steels
A. Morawiec J.A. Szpunar

1263

Misorientation Distributions and the Transition to Continuous Recrystallisation in a Strip Cast Aluminium Alloy
A. Oscarsson B. Hutchinson B. Nicol P. Bate H.-E. Ekström

1271

Direct Observation of Orientation Changes Following Channel Die Compression of Polycrystalline Aluminum: Comparison between Experiment and Model
S. Panchanadeeswaran R. Becker R.D. Doherty K. Kunze

1277

Microtexture Evolution of Necklace Structures during Hot Working
D. Ponge E. Brünger G. Gottstein

1283

Orientational Aspects of the Morphological Elements of the Microstructure in Highly Cold Rolled Pure Copper and Phosphorous Copper
K. Sztwiertnia F. Haessner

1291

Microtexture Determination of As-Drawn Tungsten Wires by Backscatter Kikuchi Diffraction in the Scanning Electron Microscope
K.Z. Troost M.H.J. Slangen E. Gerritsen

1299

Micro-Texture Analysis of Diffusion Bonded Interfaces in Al-Li Alloy Sheet
H.S. Ubhi A.W.Bowen

1305

Microtextural Characterization of Annealed and Deformed Copper
S.I. Wright F. Heidelbach

1313

Determination of Local Texture and Deformation Systems in TiA16V4 and T40
S. Zaefferer D. Gerth R.A. Schwarzer

1319

3.4 TEXTURES OF SPECIAL MATERIALS

Invited Lectures:

Textures in Thin Films
D.B. Knorr

1327

Texture Formation in Hexagonal Materials
M.-J. Philippe

1337

The Effects of Impurity Elements on the Preferred Orientation during Melt Spinning of Dilute Zn-Alloys
M.V. Akdeniz J.V. Wood

1351

Relations between Texture, Superplastic Deformation and Mechanical Properties of Thin TA6V Slabs
O . Benay A.S. Lucas S. Obadia A. Vadon

1357

Texture in Zircaloy-4: Effect ofThermomechanical Treatments
L.P.M. Brandao C.S. Da Costa Viana

1365

Texture of Electroplated Coatings of Copper and Bismuth Telluride
H. Chaouni P. Magri J. Bessières C. Boulanger J.J. Heizmann

1371

X-Ray Texture Analysis in Films by the Reflection Method: Principal Aspects and Applications
D. Chateigner P. Germi M. Pernet

1379

Experimental Studies of Texture Development in Co-Cr Films
L. Cheng-Zhang J.C. Loader J.A. Szpunar

1387

Electric Field Induced Domain Formation in Surface Stabilized Ferroelectric Liquid Crystal Cells
I. Dierking F. Gießelmann J. Schacht P. Zugenmaier

1393

Epitaxy in Texture Formation of Electrodeposited Cu-Coatings
I. Handreg P. Klimanek

1405

Texture Formation in Al₂O₃ Substrates
J. Huber W. Krahn J. Ernst A. Böcker H.J. Bunge

1411

Preferred Orientations in Polycrystalline C₆₀
K. Ho Y. Takayama K. Suenaga T. Katoh Y. Ishida

1417

Inhomogeneous Textures in Tantalum Sheets
H. Klein C. Heubeck H.J. Bunge

1423

Texture and Grain Structure Effects on the Reliability of Microelectronic Interconnects
D.B. Knorr K.P. Rodbell

1435

Textures of Aluminum and Copper Thin Films
D.B. Knorr D.P. Tracy

1443

Controlled Texture Development in Hot-Forged Lithium Fluoride
K.L. Kruger K.J. Bowman

1449

Texture Analysis in Zircaloy Cladding Tube Material for Nuclear Fuel
S.D. LeRoux D.J. Van der Merwe

1455

Natural Fibre Textures in a Naturally Textured Material
A. Oscarsson U. Sahlberg

1463

Macrotextures of Stainless Fe-Cr Steels
D. Raabe K. Lücke

1469

Neutron Diffraction Measurements of Texture in Silicon Carbide Whisker-Reinforced Aluminum Composites
J.H. Root H.J. Rack

1475

Formation of Oblique Shape and Lattice Preferred Orientation in a Quartz Band of a Gneissic Mylonite
W. Skrotzki J. Dornbusch F. Heinicke K. Ullemeyer

1481

Texture of Aluminium and Iron Thin Films and Texture of Bilayers Al/Fe Deposited on Silicon
A. Tizliouine J. Bessières J.J. Heizmann J.F. Bobo

1487

X-Ray Diffraction Study of Texture Evolution in Electrodeposited Zinc Layers
I. Tomov

1495

The Effect of Precipitates on Texture Development
H.E. Vatne O. Engler E. Nes

1501

On the Influence of a Weak Preferred Orientation on the Strength of Aluminium Oxide Ceramic
W. Winter H.-G. Brokmeier H. Siemes

1507

Influence of Segregation of Phosphorous on Texture Development in Cold-Rolled Fe-P Alloys during Annealing
L. Zhang L. Xiong H. Ning D. Ye B.J. Duggan

1513

4. TEXTURE AND DIRECTIONAL PROPERTIES OF MATERIALS

Invited Lecture:

Anisotropic Properties of Minerals and Rocks
H. Kern

1523

The Influence ofMicrostructure and Texture on Fracture Toughness in Titanium Alloy CORONA-5
S. Benhaddad C. Quesne R. Penelle

1537

Orientation Dependence of the Permeability in Textured Soft Magnetic Materials
M. Birsan J.A. Szpunar

1543

Anomalies of Young's Modulus in Fe-Cu Composites after High Degrees of Deformation
W. Böcker H.J. Bunge T. Reinert

1551

Stress Birefringence in Textured Silver Chloride
P. Dietz H. Gieleßen

1559

Limited Fibre Components in Texture Analysis; Texture Contribution in Anisotropy of Physical Properties
V.N. Dnieprenko S.V. Divinskii

1565

Local Mechanical Properties in Thin Aluminium Layers on Silicon Substrates Calculated from Measured Grain Orientations
D. Gerth R.A. Schwarzer

1571

Toughness Anisotropy in Brittle Materials
M.D. Grah K.J. Bowman

1577

Numerical Analysis of Stiffness in Sheet Products Based on Crystal Anisotropy
S. Hiwatashi T. Hatakeyama K. Ushioda M. Usuda

1585

The Dependence of the Anisotropy and Texture Properties of Injection Moulded Liquid Crystal Polymer Parts on Moulding Parameters
W. Hufenbach M. Lepper

1593

Use of Irreducible Spherical Tensors in the Calculation of the Mean Elastic Properties of Polycrystals
M. Humbert L. Zuo J. Muller C. Esling

1599

Derivation of Yield Criteria of Cubic Metals from Schmid's Law
H.-T. Jeong D.N. Lee K.H. Oh

1603

Calculation of Average Elastic Moduli of Polycrystalline Materials Including BaTiO₃ and High-T_c Superconductors
H. Kiewel L. Fritsche

1609

Textures and Plastic Strain Ratios of Planar Isotropic Sheet Metals
I.S. Kim

1623

Texture and Formability of Aluminum Sheets
S. Kohara

1629

Strain Localization and Fracture in Anisotropic FCC Metal Sheets: Shear Bands
J. Kusnierz

1635

On Some Methodical Developments Concerning Calculations Performed Directly in the Orientation Space
S. Matthies G.W. Vinel

1641

On the Geometric Mean of Physical Tensors Using Orientation Distributions
S. Matthies M. Humbert

1647

The Effect of Texture and Strain on the r-Value of Heavy Gauge Tantalum Plate
Ch. Michaluk J. Bingert C.S. Choi

1653

Determination of Young's Modulus in Textured CuZnAl Shape Memory Alloys
N.J. Park H.J. Bunge

1663

Effect of Texture and Microstructure on the Mechanical Properties of Zn Alloys
M.J. Philippe I. Beaujean E. Bouzy M. Diot J. Wegria C. Esling

1671

Diamagnetic Anisotropy of Precambrian Quartzites (Moeda Formation, Taquaral Valley, Minas Gerais, Brazil)
H. Quade T. Reinert D. Schmidt

1675

Magnetic Anisotropy and Texture of Banded Hematite Ores
H. Quade T. Reinert

1681

The Work Hardening of Pearlite during Wire Drawing
P. Watté P. Van Houtte E. Aernoudt J. Gil Sevillano W. Van Raemdonck I. Lefever

1689

Texture Gradient Effects in Tantalum
S.I. Wright A.J. Beaudoin G.T. Gray III

1695

5. MATHEMATICAL MODELLING OF TEXTURE FORMATION AND MATERIALS PROPERTIES

Invited Lectures:

Finite Element Modelling of Polycrystalline Solids
P.R. Dawson A.J. Beaudoin U.K. Mathur

1703

Modelling the Effects of Static and Dynamic Recrystallization on Texture Development
J.J. Jonas L.S. Tóth T. Urabe

1713

Theory of Grain Boundary Structure Effects on Mechanical Behaviour
B.L. Adams T.A. Mason T. Olson D.D. Sam

1731

Simulation of Rolling and Deep Drawing Textures in Ferritic Steels: Application to Ear Profiles Calculation in Deep Drawing
D. Ceccaldi F. Yala T. Baudin R. Penelle F. Royer

1739

An Equilibrium-Based Model for Anisotropic Deformations of Polycrystalline Materials
Y.B. Chastel P.R. Dawson

1747

Interconnection of Texture Development and Alternative Slipping of Different Types of Slip Systems: Computer Simulation
S.V. Divinskii V.N. Dnieprenko

1753

A New Theory of the FCC Rolling Texture Transition
B.J. Duggan C.S. Lee R.E. Smallman

1759

Effect of Cube Nucleus Distribution on Cube Texture
B.J. Duggan C.Y. Chung

1765

Texture Development and Simulation of inhomogeneous Deformation of FeCr during Hot Rolling
A.I. Fedosseev D. Raabe G. Gottstein

1771

On the Effect of Grain Orientation on Deformation Texture
J. Hirsch

1777

Experimental and Theoretical Study of the Recrystallization Texture of a Low Carbon Steel Sheet
L. Kestens U. Köhler P. Van Houtte E. Aernoudt H.J. Bunge

1783

Modelling Cyclic Deformation Textures with Orientation Flow Fields
H. Klein H.J. Bunge

1791

Failures to Model the Development of a Cube Texture during the High Temperature Compression of Al-Mg Alloys
U.F. Kocks S.R. Chen P.R. Dawson

1797

Calculation of the Recrystallization Textures of Cubic Metals
U. Köhler H.J. Bunge

1803

Comparison of a Self-Consistent Approach and a Pure Kinematical Model for Plastic Deformation and Texture Development
R.A. Lebensohn R.E. Bolmaro

1809

Lattice Rotation during Plastic Deformation with Grain Subdivision
T. Leffers

1815

Texture of Microstructures in BCC Metals for Various Loading Paths
X. Lemoine M. Berveiller D. Muller

1821

Modelling of the Texture Formation in Electrodeposition Process
D.Y. Li J.A. Szpunar

1827

Simulation of Recrystallization Texture in Copper
Y.S. Liu F. Wang J.Z. Xu Z.D. Liang

1839

Grain Growth Simulation by Monte Carlo Method in a HiB Fe 3% Si Alloy
P. Paillard R. Penelle T. Baudin

1847

Effect of Deep Drawing on Texture Development in Extra Low Carbon Steel Sheets
J. Savoie D. Daniel J.J. Jonas

1855

Contribution of EBSP to the Determination of the Rotation Flow Field
M. Serghat M.J. Philippe C. Esling B. Bouzy

1861

A Modified Self Consistent Viscoplastic Model Based on Finite Element Results
L.S. Tóth A. Molinari

1869

Prediction of Forming Limits of Titanium Sheets Using the Perturbation Analysis with Texture Development
L.S. Tóth D. Dudzinski A. Molinari

1875

Taylor Simulation of Cyclic Textures at the Surface of Drawn Wires Using a Simple Flow Field Model
P. Van Houtte P. Watté E. Aernoudt J. Gil Sevillano I. Lefever W. Van Raemdonck

1881

Modelling Microstructural Evolution of Multiple Texture Components during Recrystallization
R.A. Vandermeer D. Juul Jensen

1887

On the Theory of Compromise Texture
H.E. Vatne T.O. Saetre E. Nes

1895

Anisotropic Finite-Element Prediction of Texture Evolution in Material Forming
N. Wang F.R. Hall I. Pillinger P. Hartley C.E.N. Sturgess P. De Wever A. VanBael J. Winters P. Van Houtte

1901

Finite-Element Prediction of Heterogeneous Material Flow during Tensile Testing of Anisotropic Material
J. Winters A. Van Bael P. Van Houtte N. Wang I. Pillinger P. Hartley C.E.N. Sturgess

  1909

6. TECHNOLOGICAL APPLICATIONS OF TEXTURE STUDIES

Invited Lectures:

Practical Aspects of Texture Control in Low Carbon Steels
B. Hutchinson

1917

Inspection and Control by On-Line Texture Measurement
H.J. Kopineck

1929

The Influence of Texture on the Magnetic Properties of CoCr Films
L. Cheng-Zhang J.C. Ladder J.A. Szpunar

1941

Effect of Strain Path Change on Anisotropy of Yield Stresses of Cubic Structure Sheet Metals
J.H. Chung D.N. Lee

1947

A Quantitative Analysis of Earing during Deep Drawing of Tin Plate Steel and Aluminum
A. P. Clarke P. Van Houtte S. Saimoto

1953

Earing Prediction From Experimental and Texture Data
C.S. Da Costa Viana N.V.V. De Avila

1961

Earing in Single Crystal Sheet Metals
C.S. Da Costa Viana

1967

The Influence of Texture and Microstructure on Corrosion-Fatigue in Ti-6Al-4
J.K. Gregory H.-G. Brokmeier

1971

Texture Evolution during Deep Drawing in Aluminium Sheet
J. Hirsch T.J. Rickert

1979

Texture Inhomogeneities in High Tensile Strength Steels Processed with Low Temperature Controlled Rolling
H. Inagaki K. Inoue

1985

Annealing Textures in Aluminium Deformed by Hot Plane Strain Compression
D. Juul Jensen R.K. Bolingbroke H. Shi R. Shahani T. Furu

1991

The Effect of Grain Boundary Structure on the Intergranular Corrosion of Stainless Steel
H.M. Kim J.A. Szpunar

1997

Study on Factors Affecting r-Value ofCu Precipitation-Hardening Cold-Rolled Steel Sheet
M. Morita Y. Hosoya

2005

Importance of Process Parameters for Texture and Properties of Microalloyed Deep Drawing Steels
C.-P. Reip W. Bleck R. Großterlinden U. Lotter

2011

Earing and Textures in Austenitic Stainless Steel Type 305
T.J. Rickert

2017

Direct Oberservation of the Nucleation and Growth Rates of Cube and Non-Cube Grains in Warm Plane-Strain Extruded Commercial Purity Aluminum
I. Samajdar R.D. Doherty S. Panchanadeeswaran K. Kunze

2025

Global Texture Development in Cold Work of Copper and Brass by Pass Rolling
H. Schneider P. Klimanek H.-G. Brokmeier

2031

Texture Development in Ferrous Materials during Deformation by Pass Rolling or Compression
H. Schneider P. Klimanek

2037

Quantitative Correlation of Texture and Earing in Al-Alloys
P. Wagner K. Lücke

2043

7. IMPLICATION OF TEXTURE IN POWDER DIFFRACTION METHOD INTERNAL STRESS ANALYSIS, PHASE ANALYSIS, STRUCTURE ANALYSIS

Determination of Residual Stresses in Plastically Deformed Polycrystalline Material
A. Baczmanski K. Wierzbanowski P. Lipinski

2051

X-Ray Residual Macrostress of Texturized Polycrystals from Pole Figures
A. R. Gokhman

2059

A New Method for Crystal Structure Analysis of Textured Powder Samples
R. Hedel H.J. Bunge G. Reck

2067

Wire Geometry Correction of Textures and Stress Measurements on Wires
K. Van Acker P. Van Houtte E. Aernoudt

2075